- 668 - kbu601g thru kbu607g single phase 6.0 amps. glass passivated bridge rectifiers voltage range 50 to 1000 volts current 6.0 amperes features ul recognized file # e-96005 glass passivated junction ideal for printed circuit board reliable low cost construction plastic material has underwriters laboratory flammability classification 94v-0 surge overload rating to 175 amperes peak high temperature soldering guaranteed: 260 o c / 10 seconds / .375?, (9.5mm) lead lengths at 5 lbs., (2.3kg) tension weight: 0. 3 ounce, 8.0 grams mounting torque: 5 in. lb. max. kbu dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol kbu 601g kbu 602g kbu 603g kbu 604g kbu 605g kbu 606g kbu 607g units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum avera g e forward rectified current @t a = 65 i (av) 6.0 a peak forward surge current, 8.3 ms single half sne-wave superimposed on rated load (jedec method ) i fsm 175 a maximum instantaneous forward voltage @ 6.0a v f 1.0 v maximum dc reverse current @ t a =25 at rated dc blocking voltage @ t a =125 i r 5.0 500 ua ua typical thermal resistance (note 1) (note 2) r ja r jc 8.6 3.1 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to + 150 note: 1. thermal resistance from junction to ambient with units in free air, p.c.b. mounted on 0.5" x 0.5? (12mm x 12mm) copper pads, 0.375? (9.5mm) lead length. 2. thermal resistance from junction to case with units mounted on 2" x 3" x 0.25" al. plate.
- 669 - ratings and characteristic curves (kbu601g thru kbu607g) fig.4- typical reverse characteristics per bridge element instantaneous reverse current .( a) 0 20 40 60 80 100 120 140 0.1 1 10 100 percent of rated peak reverse voltage. (%) tj=125 c 0 tj=25 c 0 fig.1- maximum non-repetitive forward surge current per bridge element peak for ward surge current . (a) 10 5 2 12050 100 75 0 150 175 125 100 50 25 number of cycles at 60hz 8.3ms single half sine wave tj=25 c 0 fig.2- maximum forward current derating curve average for ward current . (a) 50 0 100 150 0 2 4 6 ambient temperature. ( c) o mounted on 4x4 inch copper pc board 0.5"(12.7mm) lead length fig.3- typical instantaneous forward characteristics per bridge element instantaneous for ward current . (a) .7 .6 .8 1.0 .9 1.1 1.2 1.3 0.1 0.4 40 4.0 0.2 20 2.0 1.0 10 100 instantaneous forward voltage. (v) 8.3ms single half sine wave tj=125 c 0
|
